Do It Yourself: Air Duct Cleaning And Air Duct Sanitizing

Home Improvement

Each season, cleaning your HVAC unit is essential for your indoor air quality. Most HVAC cleaning and sanitizing may get expensive. This is why most homeowners clean the system themselves. This process is called DIY cleaning, and with proper tools, it’s one of the most effective cleanings if you know what you are doing. Before you begin air duct cleaning Buford, there are some things for which you need to prepare.

Tips to know before you begin

For DIY cleaning, there are few things you should know:

  • DIY duct cleaning isn’t as easy as it looks. If you can’t do it, it’s ok for experts to handle it. If you’re not accustomed to this type of work, it may take longer to finish.
  • Air duct cleaning isn’t for the light of the heart. You might uncover all sorts of things. Such as mold, animal and insect droppings, or you may find a dead rodent.
  • Finally, on a positive note, If you take on DIY duct cleaning, you can make your ducts spotless and significantly reduce dust at the same time.

As a home-based DIYer, you probably won’t have access to fancy high-powered vacuums and rotary brushes that most duct cleaning services use. A standard vacuum may not be as effective as the professional one, but it can work. However, you can rent out the power vacuum if that’s an option available to you.

Tools of trade you Need

For cleaning your air ducts, you need the following things. As far as air duct sanitizing Buford is concerned, it will come after you clean your ducts.

  • Personal Protective Equipment (PPE) – Heavy-duty work gloves, a dust mask, and goggles to protect your eyes are needed during your DIY duct cleaning work.
  • Basic Tools – A set of screwdrivers compatible with the screws you have on your registers & return and air grille plates.
  • A couple of clean paper towels or rags.
  • A vacuum that has a long hose. A “Shop Vac” is a good vacuum you can use for DIY cleaning.
  • A stiff-bristle brush that has a long handle will be needed. A rotary dryer vent-cleaning brush or a toilet brush with bent handles are good choices.

Step-by-step DIY duct cleaning

Performing Air Duct Cleaning Buford through DIY can be challenging, but let’s simplify it. You can follow the steps below to make your DIY process easier:

  1. First, start by removing screws from air duct covers and return-air grill plates.
  2. Then you have to cover your supply air registers temporarily. For this, you can use paper towels or cloth rags. Next, lift the unscrewed register slightly and tuck a towel under it. This will keep the towel in place and stop the dust from entering your rooms during your cleaning process.
  3. Next, set your thermostat to the “fan on” position or select the fan option. The fan will help loosen the dust in air ducts that will make cleaning easier. Just make sure the heating or cooling mode is off. However, if you have an older thermostat model without a fan-only setting, run the heat.
  4. Using the brush, loosen the dust in the ducts. Starting by tapping with a brush lightly will loosen clumps of dust inside your ducts. Try not to use too much force, or it will damage the duct system.
  5. Now, uncover and lift one supply register at a time and use the vacuum hose to clean dust there. A fan blew out this dust, so cleaning is needed. Use the hose to go as deep as you can to clean all the dust out.
  6. Then start cleaning the return-air registers one-by-one using your brush and vacuum.
  7. Now carefully clean each duct cover and grill plate before reattaching them back.
  8. Change the dirty HVAC air filters. You won’t get the full benefit of clean ducts if you have clogged HVAC filters with dust and contaminants still attached. Here, cleaning may not be a viable option as it may damage filters.

During cleaning, if you happen to come across mold or mildew, a professional can help. Usually, air duct sanitizing Buford can be effective, but it can be complex as a DIY due to its process.

Step-by-step DIY Air duct sanitizing.

The next thing after cleaning is sanitizing. Air duct sanitizing can reduce air contaminants up to 99%, but no one can be sure about that figure. Anyhow, here are the steps:

  1. First of all, take precautions. Use proper gloves, masks, and protective eye goggles for cleaning and sanitizing.
  2. Since you used the vacuum before, use it to make sure the ducts and equipment are clean. You know, air ducts are a dark place where contaminants can grow. So it’s better to be thorough.
  3. Next, go to each room one by one and close all vent openings except one. You may use cardboard for that. If any of the ducts are open, the ozone will leak, which is toxic for everyone.
  4. Turn off the air conditioner unit because the ozone will work the best if there is no cold air. Now don’t go experimenting with hot air through; that’s dangerous too. Make sure to use a mask before starting the sanitizing process.
  5. Attach the hose to the ozone generator, open-air duct opening, and turn on the generator. As ozone starts filling up the air duct, the sanitizing process will begin. You may need to run the generator a couple of times for a few days to fully clear out contaminants like molds from the air ducts.
  6. Next comes the clean-up. Clean the dirt and dust that are scattered during the vacuum process. Using a mask is also recommended here.

If you don’t have access to an ozone generator, you can also use chemicals to sanitize. You could use an EPA-registered disinfectant solution called Sporicidin instead to sanitize and disinfect air ducts.

Risks of DIY Air Duct Cleaning Buford

 Air duct cleaning can be effective, but it has its risks like:

  1. It can damage your ducts – During your air duct cleaning process, there is a high chance you can damage the duct system. To counter this, it’s recommended to have an inspection of the system before cleaning. This way, you can be sure if you can do a DIY cleaning yourself or not.
  2. Less Effective Mode of Cleaning – Your indoor air quality can improve with DIY cleaning; however, the effects will not be the same as a professional will. Through DIY, you won’t be able to reach every nook and corner like the professionals can with their 150-feet long hose of a high-powered vacuum.

Benefits of DIY Air Duct Sanitizing

Even if you are a pro DIY or a new to air duct sanitizing, it can improve your in-home air quality. Furthermore, it reduces bacterial odors, reduces moldy smell, and any other lingering odors in the house efficiently. If you have a pet, air duct sanitizing Buford can also remove their lingering smell.

Leave a Reply

Your email address will not be published.